ESAB A2 PEK Instruction Manual page 7

1 INTRODUCTION
SAW: CA
NONE
The control panel is set to English on delivery. To select your language, proceed as follows:
Press Menu to access the main menu.
Position the cursor on the CONFIGURATION row, using the positioning knob.
SAW
PROCESS
METHOD
REGULATION TYPE
WIRE TYPE
WIRE DIMENSION
CONFIGURATION►
TOOLS►
SET
Press ENTER to confirm the selection.
Position the cursor on the LANGUAGE row. Press ENTER to bring up a list of the languages
that are available in the control panel.
CONFIGURATION
LANGUAGE
CODE LOCK►
GENERAL CONFIGURATION►
MACHINE CONFIGURATION►
CABLE LENGTHS►
MAINTENANCE►
MEASURE-VALUES FILTER FACTOR
Position the cursor on the row for your language and press ENTER.
0460 949 474
NONE GAS / FLUX
MEASURE MEMORY
NONE
FAST MODE
- 7 -
2ND FUNCT
SAW
DC
CA
Fe SOLID
3.0 mm
ENGLISH
ONE
QUIT
© ESAB AB 2021