Tools; Event Handling; Event Log - ESAB A2 PEK Instruction Manual

10 TOOLS

10 TOOLS
MAIN MENU » TOOLS
This menu contains the following sub-menus:
• Event handling, see section "Event handling".
• Export/Import, see section "Export/Import".
• File manager, see section "File manager".
• Edit setting limits, see section "Setting limit editor".
• Edit measure limits, see section "Measure limits editor".
• Production statistics, see section "Production statistics".
• Quality functions, see section "Quality functions".
• Calendar, see section "Calendar".
• User accounts, see section "User accounts".
• Unit information, see section "Unit information".
10.1

Event handling

MAIN MENU » EVENT HANDLING
Fault management codes are used to indicate that a fault has occurred in the welding
process. Indicated in the display via a pop-up menu and an exclamation mark
the upper right-hand corner of the display.
NOTE!
disappears from the display as soon as you enter the event log menu.
The Event handling menu has got two sub-menus, Event log (see section "Event log") and
Active errors (see section "Active errors").
EVENT HANDLING

EVENT LOG►

ACTIVE ERRORS►
10.1.1 Event log
MAIN MENU » TOOLS » EVENT HANDLING » EVENT LOG
All errors that arise during the use of the welding equipment are documented as error
messages in the error log. Up to 99 error messages can be saved. If the error log becomes
full, i.e. if 99 error messages have been saved, the oldest message is automatically deleted
when the next fault occurs.
The following information can be read in the error log:
• The error number of the error
• The day on which the error occurred
• The time at which the error occurred
0460 949 474 - 59 -
appears in
QUIT
© ESAB AB 2021