ESAB A2 PEK Instruction Manual page 48

9 CONFIGURATION MENU
1. HEAD
2. TAIL
NOTE!
Ensure that both control units have the same settings for WELD HEAD OFFSET and
specify the same travel speed. The master control unit must be allocated HEAD and
the slave control unit TAIL. Travel motion is always controlled from master.
Specify the values to weld with two welding heads as follows:
Position the cursor on the WELDING HEAD row. Select whether the setting is to apply to
master control unit HEAD or slave control unit TAIL.
MACHINE CONFIGURATION
PRODUCT CODE
WIRE FEED AXIS►
TRAVEL AXIS►
TANDEM
└ WELDING HEAD
└ WELD HEAD OFFSET
└ WITH I/O
• Position the cursor on the WELD HEAD OFFSET row and specify the distance between
the two welding heads.
0460 949 474
3. WELD HEAD OFFSET
- 48 -
A2TF J1
ON
HEAD
20 mm
ON
QUIT
© ESAB AB 2021