Copy - ESAB A2 PEK Instruction Manual

8 MEMORY MANAGEMENT
WELD DATA MEMORY
5 - (SAW)
DELETE WELD DATA NR. 5?
8.5

Copy

To copy the content of a weld data set to a new memory position, proceed as follows:
Press 2ND FUNCT.
WELD DATA MEMORY
5 - (SAW)
STORE RECALL
Select the memory position you want to copy and press COPY.
WELD DATA MEMORY
5 - (SAW)
COPY RENAME
We are now going to copy the content of memory position 5 to position 50.
Select memory position 1 and scroll through using one of the settings knobs to the selected
memory position; in this case, position 50. Press YES.
0460 949 474
SAW: CA: FE SOLID: 3.0 mm
30.0 V: 450 A: 50 cm/min
SAW: CA: FE SOLID: 3.0 mm
30.0 V: 450 A: 50 cm/min
DELETE
SAW: CA: FE SOLID: 3.0 mm
30.0 V: 450 A: 50 cm/min
EDIT
NO
2ND FUNCT
2ND FUNCT
- 36 -
YES
QUIT
QUIT
© ESAB AB 2021