Product Code - ESAB A2 PEK Instruction Manual

9 CONFIGURATION MENU
• Tandem, see section "Tandem for LAF and TAF power sources", and "Tandem for
Aristo® 1000 power source".
• Parallel power sources, see section "Parallel power sources (applies only to Aristo
1000® power sources)".
• ICE wire feed, see section "ICE wire feed".
• Step function, see section "Step function".
• Intermittent welding, see section "Intermittent welding "
• Polarity, see section "Polarity (applies only to Aristo® 1000 power source)".
• Node ID settings, see section "Node id settings (applies only to Aristo® 1000 power
source)".
• System information, see section "System information (applies only to Aristo® 1000
power source)".
9.3.1

Product code

In the PRODUCT CODE menu it is possible to select the automatic welding machine, column
and boom, roller bed or positioner to be used.
MACHINE CONFIGURATION
PRODUCT CODE
WIRE FEED AXIS►
TRAVEL AXIS►
TANDEM►
PARALLEL POWERSOURCES►
ICE WIRE FEED►
STEP FUNCTION►
INTERMITTENT WELDING
NODE ID SETTINGS►
SYSTEM INFORMATION►
When selecting product code, the correct motor type and gear ratio for the used gearbox in
the relevant product are selected automatically.
0460 949 474 - 44 -
A2TF J1
OFF
OFF
POSITIVE
QUIT
© ESAB AB 2021