Introduction; Control Panel - ESAB PEK A2 Instruction Manual

GB
1

INTRODUCTION

To benefit as much as possible from your welding equipment, we recommend that
you read this instruction manual.
For general information about operation, see the instruction manual for the control
unit, automatic welding machine, column and boom or power source.
The text presented in the display is available in the following languages:
English, Swedish, Finnish, Norwegian, Danish, German, French, Italian, Dutch,
Spanish, Portuguese, Hungarian, Polish, American, Czech, Chinese and Russian.
1.1

Control panel

1 Menu
2 Knob for moving cursor
(positioning knob)
3 ENTER
4 Green indicating lamp,
illuminates when the
function is active
5 Welding start
6 Welding stop
7 Knob for setting the travel speed in
the measurements menu, in other
menus to increase or decrease the set values (settings knob)
Manual travel motion
8
9 Manual wire feed downwards
10 Knob for setting the arc voltage in the measurements menu, in other menus to
increase or decrease the set values (settings knob)
11 Fast motion
12 Manual travel motion
13 Knob for setting the welding current / wire feed speed in the measurements
menu, in other menus to increase or decrease the set values (settings knob)
14 Emergency stop
15 Manual wire feed upwards
bi24d1ea
− 5 −