Selecting The Observation Method; When Bx3M-Rlas-S Is Combined; When Bx3M-Kma-S Is Combined; When Bx3M-Rla-S Is Combined - Olympus BX53M Instructions Manual

3-4 Selecting the observation method

a
1
a
1

When BX3M-RLAS-S is combined

1
Select the observation method with the observation method selector
knob.
1
Display
DIC/PO
When the hand switch is combined
The lighting of the CUBE indicator a of the hand switch (BX3M-HS)
is changed according to the selection of the observation method
selector knob.
2

When BX3M-KMA-S is combined

The reflected LED light illuminator for BF (BX3M-KMA-S) is available
only for the brightfield observation. The other observation methods
cannot be selected.
3

When BX3M-RLA-S is combined

1
Select the observation method using the brightfield/darkfield selector
knob.
Display
· Slide the brightfield/darkfield selector knob to the stopper
NOTE
position completely.
· The dummy slider a is attached to the nosepiece as a
factory default. Be sure to keep this dummy slider inserted
to prevent flares before use.
Function
BF The brightfield observation is selected.
DF The darkfield observation is selected.
The differential interference contrast
observation or the polarization
observation is selected.
Function
BF The brightfield observation is selected.
DF The darkfield observation is selected.
BX53M
17