Olympus BX53M Instructions Manual page 102

a
b
b
4
96
1
Attaching the condenser
2
1
Turn the coarse focusing knob to raise the stage holder a to the
upper limit.
2
Turn the condenser height adjustment knob to lower the condenser
holder b sufficiently.
1
3
Loosen the condenser clamping knob sufficiently.
3
5
4
Insert the condenser along the dovetail of the condenser holder b
from the front side and push it until it touches the end.
NOTE
6
5
Tighten the condenser clamping screw.
6
Turn the condenser height adjustment knob to raise the condenser
holder to the upper limit.
· When using the condenser attached with positioning
pin on the back, attach it by pushing in the groove of the
condenser holder.
· Before attaching the condenser attached with swing-out
top lens, swing out the top lens.