Olympus BX53M Instructions Manual page 39

b
1
0 10 20 30 40 50 60 70
c
When the eyepiece is equipped with the eyepiece micrometer
1
While looking into the eyepiece equipped with the eyepiece
micrometer, turn the diopter adjustment ring b to adjust so that the
scales or lines of the eyepiece micrometer in the field of view are clearly
a
visible. If you turn the diopter adjustment ring b , keep pressing the
lower part a of the eyepiece.
2
Place the sample.
3
Engage the 10X objective in the light path. While looking into the
eyepiece equipped with the eyepiece micrometer, turn the coarse/
fine focusing knobs to bring the sample into focus.
4
Turn the diopter adjustment ring b of the eyepiece not equipped with
the eyepiece micrometer to bring the sample into focus.
80 90 100
When the observation tube is equipped with the interpupillary distance
adjustment ring c
Perform the same operation as described above.
However, since the eyepiece is not equipped with the diopter
adjustment ring b , use the interpupillary distance adjustment ring
c of the observation tube.
BX53M
33