Olympus BX53M Instructions Manual page 121

17
Cable connections
· Before connecting or disconnecting cables, set the main switch to
NOTE
from the outlet.
· This product contains the motorized parts. For the safety purpose, connect the power cord plug last.
· Cables are vulnerable when bent or twisted. Never subject them to excessive force.
· Be sure to connect only cables specified by Olympus to the connectors.
Connect the connectors in the correct orientation paying attention to the shape of the connector.
If the connector is attached with clamping screws, be sure to tighten them.
Reflected LED lamp
housing
BX3M-LEDR
Control box
BX3M-CB
MIX slider
for reflected light observation
U-MIXR
Cable for U-MIXR
U-MIXRCBL
Hand switch for
motorized nosepiece
BX3M-HSRE
Hand switch for
exposure
U-HSEXP
Hand switch
BX3M-HS
(OFF) and unplug the power cord
Coded reflected light illuminator
BX3M-RLAS-S
BX3M-URAS-S
Transmitted LED
lamp housing
BX3M-LEDT
Ground terminal for ESD
When connecting the external devices
applicable for ESD, connect the ground
terminal to this position.
BX53M
Cable for motorized nosepiece
BX3M-RMCBL
Cable for coded reflected
light illuminator
Cable for coded
nosepiece
Hand switch for
motorized nosepiece
BX3M-HSRE
Hand switch for
exposure
U-HSEXP
115