Olympus BX53M Instructions Manual page 123

1
b
a
d
c
18
Connecting the AC adapter and the power cord
With this system, the AC adapter and the power cord must be
connected to 2 locations: microscope frame and control box (BX3M-
CB).
· Always use the power cord provided by Olympus. If the
CAUTION
proper power cords are not used, the electric safety and
the EMC (Electro-Magnetic Compatibility) performance
of the product can not be assured. If no power cord is
provided, please select the proper power cord by referring
to the section "Proper selection of the power supply cord"
at the end of this instruction manual.
· Set the main switch of the microscope frame to
and connect the power cord.
· Connect the power cord plug to the grounded triplex outlet.
If the outlet is not grounded, the electric safety performance
intended by Olympus cannot be assured.
· If the power cords contact a hot area of products such as
a lamp housing, etc., they could melt and cause electric
shock. Be sure to place the power cords sufficiently apart
from the hot area of the product.
· Cables are vulnerable when bent or twisted. Never subject
NOTE
them to excessive force.
· When inserting or removing the AC adapter plug, hold the
a and c parts and insert straightly.
1
Insert the AC adapter plug a firmly in the AC adapter jack b of the
control box (BX3M-CB).
2
Insert the different AC adapter plug c firmly in the AC adapter jack
d of the microscope frame.
2
BX53M
(OFF)
117