Olympus BX53M Instructions Manual page 34

b
a
c
28
Procedure to replay the brightness
1
Press the LIM switch a to set the "Replay" mode. (The LIM indicator
b is ON.)
2
When the desired objective or the observation method is selected, the
stored brightness is set automatically.
Example of the stored brightness
When you press the SET switch d when units are combined and set
as follows, the brightness corresponding to
will be stored.
d
Combination example 1
Unit
Reflected LED lamp housing (BX3M-LEDR)
Transmitted LED lamp housing (BX3M-LEDT)
Coded reflected LED light illuminator for BF/DF/PO
(BX3M-RLAS-S)
Coded quintuple revolving nosepiece for BF/DF
with slider slot for DIC
(U-D5BDRES-ESD)
Objective
5X(1 hole), 10X(2 holes), 20X(3 holes), 50X(4 holes),
100X(5 holes)
Example of stored brightness 1
Observation Reflected light illumination
method
CUBE1 CUBE2 CUBE3
Objective
OB1
OB2
OB3
or in the tables
Setting
Reflected light
illumination
DF
20X
Transmitted
light
illumination