Olympus BX53M Instructions Manual page 10

CAUTION - LED (light emitting diode) -
a
Do not press with your finger.
CAUTION - Protection for injury -
Do not pull the cable with an excessive force.
If you pull the cable connected to the control box (BX3M-CB) with an excessive force, the control box may drop and
your hands may be pinched.
Be careful not to drop the glass plate.
If you are using the glass plate, be careful not to drop the glass plate. If the glass plate drops and is broken, you may
get injured by the broken pieces.
4
Do not look directly at the light from the LED light source for a long
time.
The LED built in this product is basically eye-safe. However, do not look
directly at the light from the LED lamp house for a long time, since it may
cause damage to your eyes.
If the laws or regulations for workers health and safety have been established,
follow them when using the microscope.
Do not look directly at the light coming out from the objective or the
specular reflection light from the specimen.
Do not look directly at the light coming out from the objective for a long time,
since it may cause damage to your eyes.
Do not expose your skin to the light coming out from the objective
for a long time.
If your skin is exposed to the light coming out from the objective for a long
time, you may get burned.
Do not press the micro switch of the MIX slider for reflected light
observation (U-MIXR) with your finger.
If you press the micro switch a of the MIX slider for reflected light
observation with your finger, the MIX slider for reflected light observation may
emit the light.
Do not insert the MIX slider for reflected light observation (U-MIXR)
upside down.
Do not insert the MIX slider for reflected light observation upside down.
Otherwise, the light coming out from the MIX slider for reflected light
observation enters your eyes through the eyepiece and your eyes may be
damaged.