Table of Contents
Advertisement
3-2 Turning ON the main switch
3-3 Selecting the observation method
16
1
If the control box (BX3M-CB) is combined, set the main switch of
the control box to (ON). When the power is ON, the beep sound is
heard once.
2
If the control box for coded function (U-CBS) is combined, set the main
switch of the control box for coded function to (ON).
3
If following units are combined, set the main switch of respective unit
to (ON).
Combinable units
Mercury lamp housing
Light source
Halogen lamp housing
LED lamp housing
1
When BX3M-RLAS-S is combined
1
Select the observation method with the observation method selector
1
knob.
Display
DIC/PO
2
When BX3M-KMA-S is combined
The reflected LED light illuminator for BF (BX3M-KMA-S) is available
only for the brightfield observation. The other observation methods
cannot be selected.
Unit to set to ON
Main switch of the power supply for
mercury burner (U-RFL-T)
Main switch of the light source
(U-HGLGPS)
Main switch of the halogen lamp power
supply unit (TH4)
Main switch of the Power supply for
LED (BX3M-PSLED)
For details, refer to the instruction manual provided
with the respective unit.
Function
BF
The brightfield observation is selected.
DF
The darkfield observation is selected.
The differential interference contrast
observation or the polarization
observation is selected.
Advertisement
Table of Contents
