3-9 Adjusting the brightness
a
a
b
26
1
When the LED lamp housing is combined
Turn the brightness control knob of the microscope frame a clockwise
to increase the brightness of the illumination.
2
When the halogen lamp housing is combined
Turn the brightness control knob a of the halogen lamp power supply
unit (TH4) to MAX (high voltage side) to increase the brightness of the
illumination.
For details of the halogen lamp power supply unit (TH4), refer to
the instruction manual provided with the unit.
3
When the mercury lamp housing is combined
Engage the ND filter in the light path and adjust the transmittance of
the illumination light. For details, see "3-14 Inserting the reflected light
illumination filter" (page 42).
4
When the light source is combined
Rotate the light intensity adjustment dial a to adjust the light intensity.
1
· Rotating the light intensity adjustment dial a allows you to
TIP
a
· The larger the numerical characters on the counter b become,
change the numerical characters (Min: 010, Max: 100) on the
counter b in increments of 5.
the brighter the lamp becomes.
For details of the LED and LDP light source (U-LGPS),
refer to the instruction manual provided with the unit.