Condenser Portion; Selecting The Observation Method - Olympus CX43 Instructions Manual

4-6 Condenser portion

1

Selecting the observation method

b
b
a
Rotating the turret of the condenser allows you to select the observation
method.
Rotate the turret a to select the observation method from the following
1
table (Display of turret) and display it on the front b .
a
Display of
turret
BF
DF
Ph1
Ph2
Ph3
FL
2X
Fixing the turret
If no observation method other than the brightfield observation is selected,
the turret can be fixed so that it does not move from the BF position
unexpectedly.
The turret can be fixed with the stage fixing knob (see
NOTE
page 12). Both the stage and turret cannot be fixed at the
same time.
1
Rotate the turret to select BF (brightfield observation).
Screw the stage fixing knob a in the screw hole b at the back of
2
the condenser and fix it.
Observation method
Brightfield observation (see page 7)
Darkfield observation (see page 7)
Phase contrast observation (see page 23)
Fluorescence observation
Brightfield observation
( Select when using 2X objective.).
CX43
19