Shutter On And Off Control (Shu); Source Name Setting (Sns) - Christie G Series Application Manual

Read/Write
Yes
Examples
Command
(PWR0)
(PWR1)
(PWR?)

Shutter On and Off Control (SHU)

Use this command to open or close the shutter.
Subcode
None. Use n and p to select next and previous values.
Read/Write
Yes
Examples
Command
(SHU0)
(SHU1)

Source Name Setting (SNS)

Use this command to change the source name to a user-defined name.
Subcode
Subcode availability is determined by your hardware configuration.
Subcode
SRC0
SRC1
SRC2
SRC3
G Series Serial Commands Application Guide
020-000578-02 Rev. 1 (01-2014)
Turns the projector off.
Turns the projector on.
Returns the current power state of the projector. For example, (PWR!11) is returned
when the projector is warming up and (PWR!10) is returned when the projector is
cooling down.
Opens the shutter.
Closes the shutter and displays a black screen.
Applies a new name to the VGA1 input.
Applies a new name to the VGA2 input.
Applies a new name to the BNC input.
Applies a new name to the HDMI1 input.
Description
Description
Description
Commands
63