Table of Contents
Advertisement
Examples
Command
(NET+SLCT1)
(NET+MAC0"00:E0:47:01:02:3C")
(NET+ETH0"192.168.000.001")
(NET+SUB0"255.255.255.000")
Zoom (ZOM)
Use this command to adjust the lens zoom.
Subcode
None. Use n and p to select next and previous values.
Read/Write
Write only
Examples
Command
(ZOM p)
Lamp Commands
This section lists the commands that you can use to manage the projector lamp.
Lamp Info (LIF)
Use this command to return lamp hour information.
Subcode
Subcode
LP1H
LPTH
Read/Write
Read only
G Series Serial Commands Application Guide
020-000578-02 Rev. 1 (01-2014)
Turns wireless LAN on.
Sets the MAC address to 00:E0:47:01:02:3C.
Sets the IP address to 192.168.000.001
Sets the the subnet mask to 255.255.255.000.
Decreases zoom by 1.
Returns the number of hours the lamp was operating.
Returns the number of hours for all lamps.
Description
.
Description
Description
Commands
46
Advertisement
Table of Contents
