Gamma Curve (Bgc); Green Gain (Gog); Green Offset (Goo) - Christie G Series Application Manual

Gamma Curve (BGC)

Use this command to select a gamma correction curve.
Subcode
None. Use n and p to select next and previous values.
Read/Write
Yes
Examples
Command
(BGC0):Video
(BGC1):Film
(BGC2):Bright
(BGC3):CRT
(BGC4):DICOM

Green Gain (GOG)

Use this command to modify the green gain of an image. This setting can only be applied to VGA or
component signals. The adjustment range is 0 to 100 and the default value is 50.
Subcode
None
Read/Write
Yes
Examples
Command
(GOG50)

Green Offset (GOO)

Use this command to adjust the green offset of an image. Adjusting this setting also affects the
black and white components of an image. This setting can only be applied to VGA or component
signals. The adjustment range is 0 to 100 and the default value is 50.
G Series Serial Commands Application Guide
020-000578-02 Rev. 1 (01-2014)
Selects a gamma correction curve for video input.
Selects a gamma correction curve for film input.
Selects a gamma correction curve for bright content.
Selects a gamma correction curve for computer input.
Selects a gamma correction curve for DICOM input. This command can only be run
on DWX600-G, DHD600-G, and DWU600-G projectors.
Sets the green gain to 50
Description
Description
Commands
24