Digital Horizontal Shift (Dsh) - Christie G Series Application Manual

This image illustrates the maximum adjustment range:
Subcode
Subcode
TARC
BARC
LARC
RARC
Read/Write
Write only
Examples
Command
(CRV+TARC 20)

Digital Horizontal Shift (DSH)

Use this command to move the projector image left or right. If the image is not zoomed out (Digital
Zoom), this command is disabled.
Set the value to zero to move the display area to the extreme left. Set the value to 50 to
horizontally center the display area. Set the value to 100 to move the display area to the extreme
right. The adjustment range is 0 to 100 and the default value is 50.
Subcode
None
Read/Write
Yes
G Series Serial Commands Application Guide
020-000578-02 Rev. 1 (01-2014)
Applies a top arc adjustment.
Applies a bottom arc adjustment.
Applies a left arc adjustment.
Applies right arc adjustment.
Sets the top arc adjustment value to 20.
Description
Description
Commands
6