Blue Gain (Bog); Blue Offset (Roo); Brightness (Brt) - Christie G Series Application Manual

Blue Gain (BOG)

Use this command to adjust the blue gain of an image. This setting can only be applied to VGA or
component signals. The adjustment range is 0 to 100 and the default value is 50.
Subcode
None
Read/Write
Yes
Examples
Command
(BOG50)

Blue Offset (ROO)

Use this command to adjust the blue offset of an image. Adjusting this setting also affects the black
and white components of an image. This setting can only be applied to VGA or component signals.
The adjustment range is 0 to 100 and the default value is 50.
Subcode
None
Read/Write
Yes
Examples
Command
(BOO50)

Brightness (BRT)

Use this command to adjust the image black level by applying an offset to the input image.
The adjustment range is 0 to 100 and the default value is 50.
Subcode
None
G Series Serial Commands Application Guide
020-000578-02 Rev. 1 (01-2014)
Sets the blue gain to 50.
Sets blue offset to 50.
Description
Description
Commands
17