Video Black Level (Vbl); White Peaking (Wpk) - Christie G Series Application Manual

Command
(DTL3):Low
(DTL4):Minimum

Video Black Level (VBL)

Use this command to optimize the black level of analog sources. When the option is on, the
projector analyzes the current image, calculates an offset value, and adds it to the analog digital
converter black level value.
Subcode
None. Use n and p to select next and previous values.
Read/Write
Yes
Examples
Command
(VBL0):IRE Off
(VBL1):IRE on

White Peaking (WPK)

Use this command to increase the brightness of whites to near 100%. This setting can only be
applied to video sources. The adjustment range is 0 to 100.
Subcode
None
Read/Write
Yes
Examples
Command
(WPK50)
G Series Serial Commands Application Guide
020-000578-02 Rev. 1 (01-2014)
Sets the sharpness setting to low.
Sets the sharpness setting to its minimum value.
Turns video black level optimization off.
Turns video black level optimization on.
Sets white peak to 50.
Description
Description
Description
Commands
29