Subcode
Subcode
TLCX
TLCY
TRCX
TRCY
BLCX
BLCY
BRCX
BRCY
Read/Write
Write only
Examples
Command
(CNR+TLCY 20)
Geometry Correction (WRP)
Use this command to apply a geometry correction to an image. These are the available options:
•
Off - A geometry correction is not applied to the image.
•
Basic - Adjusts keystone and pincushion when a Dual Processor Warp Module (DPWM) is not
installed. If a DPWM is installed, keystone, pincushion/barrel, and 4-corner can be adjusted.
•
Curve - Adjusts curve and 4-corner when a DPWM is installed. This option is unavailable if a
DPWM is not installed.
•
Rotate - Adjusts rotate and 4-corner when a DPWM is installed. This option is unavailable if a
DPWM is not installed.
G Series Serial Commands Application Guide
020-000578-02 Rev. 1 (01-2014)
Applies a top left horizontal adjustment.
Applies a top left vertical adjustment.
Applies a top right horizontal adjustment.
Applies a top right vertical adjustment.
Applies a bottom left horizontal adjustment.
Applies a bottom left vertical adjustment.
Applies a bottom right horizontal adjustment.
Applies a bottom right vertical adjustment.
Sets the top left vertical adjustment value to 20.
Description
Description
Commands
9