Vertical Position (Vrt); Image Setting Commands; Blank On Signal Switch (Bss) - Christie G Series Application Manual

Vertical Position (VRT)

Use this command to move the starting point of the input capture. When applying this function,
some of the active area is blank. Increase the value to move the active image up. The adjustment
range is 0 to 100 and the default value is 50.
Subcode
None
Read/Write
Yes
Examples
Command
(VRT50)

Image Setting Commands

This section lists the commands that you can use to modify image settings.

Blank on Signal Switch (BSS)

Use this command to modify the projector response when it is acquiring a signal or switching
inputs. The default is off.
Subcode
None
Read/Write
Yes
Examples
Command
(BSS 0)
(BSS 1)
G Series Serial Commands Application Guide
020-000578-02 Rev. 1 (01-2014)
Turns blank on signal switch off.
Turns blank on signal switch on.
Description
Description
Commands
16