Splash Screen Setup (Sps) - Christie G Series Application Manual

Read/Write
Yes
Examples
Command
(SLP0):OFF
(SLP1):2 Hrs.
(SLP2):4 Hrs.
(SLP3):6 Hrs

Splash Screen Setup (SPS)

Use this command to identify which splash screen displays when an image or test pattern is not
displayed. The default is Factory Logo.
Subcode
Subcode
SLCT
Read/Write
Yes
Examples
Command
(SPS+SLCT0):Factory Logo
(SPS+SLCT1):Blue
(SPS+SLCT2):Black
(SPS+SLCT3):White
G Series Serial Commands Application Guide
020-000578-02 Rev. 1 (01-2014)
Turns the sleep timer off.
Turns the sleep timer on after two hours.
Turns the sleep timer on after four hours.
Turns the sleep timer on after six hours.
Identifies the splash screen to display.
Use and to select next and previous values.
n p
Displays the factory logo.
Displays a blue screen.
Displays a black screen.
Displays a white screen.
Description
Description
Description
Commands
44