Ceiling Mount Setting (Cel); Change Pin (Pcg) - Christie G Series Application Manual

Command
(ASH5) 25 MIN
(ASH6) 30 MIN

Ceiling Mount Setting (CEL)

Use this command to change the image orientation of ceiling mounted projectors.
Subcode
None
Read/Write
Yes
Examples
Command
(CEL0):Ceiling mount off
(CEL1):Ceiling mount on
(CEL2):Auto

Change PIN (PCG)

Use this command to change the personal identification number (PIN) on a projector. The default is
12345.
Subcode
None
Read/Write
Yes
Examples
Command
(PCG"OOOOO,NNNNN")
G Series Serial Commands Application Guide
020-000578-02 Rev. 1 (01-2014)
Activates auto shut down after 25 minutes.
Activates auto shut down after 30 minutes.
Turns the ceiling mount setting off.
Turns the ceiling mount setting on and turns the image upside down.
Automatically adjusts image orientation to the projector position.
Replaces the existing PIN number. The value 00000 is the previous number and the
value NNNNN is the new number.
Description
Description
Description
Commands
31