Enter Service Code (Uid); Error Log (Err) - Christie G Series Application Manual

Subcode
SPX3
Read/Write
Yes
Examples
Command
(CWI+SPX2 26)

Enter Service Code (UID)

Use this command to place the projector in service mode.
Subcode
None
Read/Write
Write only.
Examples
Command
(UID"service,service")

Error Log (ERR)

Use this command to display or clear the error log.
Subcode
Subcode
CLER
Read/Write
Write only.
G Series Serial Commands Application Guide
020-000578-02 Rev. 1 (01-2014)
Sets the color wheel index speed to 3x.
Sets color wheel index 26 speed to 2x.
Places the projector in service mode.
Clears the error log.
Description
Description
Description
Description
Commands
57