E Series Serial Command Version (Siv); Get Last System Error (Lse); Key Code Entry Setting (Key) - Christie G Series Application Manual

E Series Serial Command Version (SIV)

Use this command to return the E series serial command version.
Subcode
None
Read/Write
Read only.
Examples
Command
(SIV?)

Get Last System Error (LSE)

Use this command to return the last system error.
Subcode
None
Read/Write
Read only.
Examples
Command
(LSE?)

Key Code Entry Setting (KEY)

Use this command to send key codes to the projector. This command is typically used by
manufacturing and service to simulate key pad and infrared remote inputs.
Subcode
None
G Series Serial Commands Application Guide
020-000578-02 Rev. 1 (01-2014)
Returns the E series serial command version.
Returns the last system error. For example:
• LSE=1 - The lamp did not strike after 5 attempts.
• LSE=3 - The lamp went out unexpectedly.
• LSE=4 - Fan failure.
• LSE=5 - Over temperature.
Description
Description
Commands
60