Detect Film (Fmd); Dynamic Black (Dim) - Christie G Series Application Manual

Subcode
None. Use n and p to select next and previous values.
Read/Write
Yes
Examples
Command
(DTL0):Maximum
(DTL1):High
(DTL2):Normal
(DTL3):Low
(DTL4):Minimum

Detect Film (FMD)

Use this command to control film mode detection. When active, video motion is analyzed to
determine if the video input is film (interlaced) or video (progressive). The analysis allows
interlaced content to display correctly. The default is Off.
Subcode
None. Use n and p to select next and previous values.
Read/Write
Yes
Examples
Command
(FMD0):Detect film OFF
(FMD1):Detect film ON

Dynamic Black (DIM)

Use this command to allow the projector to automatically adjust the black values of the displayed
image. The default is Off.
Subcode
None. Use n and p to select next and previous values.
G Series Serial Commands Application Guide
020-000578-02 Rev. 1 (01-2014)
Sets the sharpness setting to its maximum value.
Sets the sharpness setting to high.
Sets the sharpness setting to normal.
Sets the sharpness setting to low.
Sets the sharpness setting to its minimum value.
Turns film detect off.
Turns film detect on.
Description
Description
Commands
22