Command
(PPP6)
(PPP7)
Picture-in-Picture and Picture-by-Picture Size (PHS)
Use this command to set the picture-in-picture or picture-by-picture size.
Subcode
None
Read/Write
Yes
Examples
Command
(PHS0)
(PHS1)
(PHS2)
Picture-in-Picture and Picture-by-Picture Swap (PPS)
Use this command to switch between picture-in-picture or picture-by-picture on or off.
Subcode
None
Read/Write
Yes
G Series Serial Commands Application Guide
020-000578-02 Rev. 1 (01-2014)
Places the picture-in-picture image on the top left. For example:
Large:
Medium:
Places the picture-in-picture image on the top right. For example:
Large:
Medium:
Creates a small picture-in-picture or picture-by-picture.
Creates a medium picture-in-picture or picture-by-picture.
Creates a large picture-in-picture or picture-by-picture.
Description
Small:
Small:
Description
Commands
54