Christie G Series Application Manual page 40

Subcode
TOPW
BTMW
LFTW
RHTW
BLOF
NBOF
BGAM
Read/Write
Yes
Examples
Command
(EBL+SLCT 1)
(EBL+MRKR 1)
(EBL+GRID 2)
(EBL+COLR 2)
(EBL+TOPW 200)
(EBL+BLOF 1000)
(EBL+NBOF 1000)
(EBL+BGAM 300)
G Series Serial Commands Application Guide
020-000578-02 Rev. 1 (01-2014)
Sets the top blend width.
Sets the bottom blend width.
Sets the left blend width.
Sets the right blend width.
Sets the bight area brightness offset.
Sets the non-blend area brightness offset.
Sets the blend area gamma drop off curve.
Turns edge blending on.
Turns marker frame on.
Displays the red grid test pattern. These are the valid values:
• 0 (Off)
• 1 (White)
• 2 (Red)
• 3 (Green)
• 4 (Blue)
Displays the solid red test pattern. These are the valid values:
• 0 (Off)
• 1 (White)
• 2 (Red)
• 3 (Green)
• 4 (Blue)
Sets the top blend width to 200 pixels (0-half output height)
Sets the blend area brightness offset to 1000. The adjustment range is
zero to 2000.
Sets the non-blend area brightness offset to 1000. The adjustment range
is zero to 2000.
Sets the blend area gamma drop off curve to 300. The adjustment range
is 70-300.
Description
Description
Commands
34