Digital Vertical Shift (Dsv); Digital Horizontal Zoom (Dzh) - Christie G Series Application Manual

Examples
Command
(DSH50)

Digital Vertical Shift (DSV)

Use this command to move the projector image up or down. If the image is not zoomed out (Digital
Zoom), this command is disabled.
Set the value to zero to move the display area to the top. Set the value to 50 to vertically center
the display area. Set the value to 100 to move the display area to the bottom. The adjustment
range is 0 to 100 and the default value is 50.
Subcode
None
Read/Write
Write only
Examples
Command
(DSV50)

Digital Horizontal Zoom (DZH)

Use this command to change the size of projector horizontal display area. If the display area has
been resized with this setting, use the Digital Horizontal Shift and Digital Vertical Shift commands
to readjust the image. The adjustment range is 50% to 400% and the default value is 100%.
Subcode
None
Read/Write
Yes
Examples
Command
(DZH100)
G Series Serial Commands Application Guide
020-000578-02 Rev. 1 (01-2014)
Description
Description
Description
Commands
7