Table of Contents
Advertisement
Subcode
MNTP
ROFR
GOFR
BOFR
GOFG
ROFG
BOFG
BOFB
ROFB
GOFB
ROFW
GOFW
BOFW
Read/Write
Yes
Examples
Command
(CCA+MTRA 1)
(CCA+MNTP 1)
(CCA+RDMI 453)
Edge Blending (EBL)
Use this command to create a single image from a multi-projector installation. This command is
only available when a Dual Processing Warp Module is installed
Subcode
Subcode
SLCT
MRKR
GRID
COLR
G Series Serial Commands Application Guide
020-000578-02 Rev. 1 (01-2014)
Turns auto test patterns for manual adjustment items on or off.
Manually adjusts the red portion of red.
Manually adjusts the green portion of red.
Manually adjusts the blue portion of red.
Manually adjusts the green portion of green.
Manually adjusts the red portion of green.
Manually adjusts the blue portion of green.
Manually adjusts the blue portion of blue.
Manually adjusts the red portion of blue.
Manually adjusts the green portion of blue.
Manually adjusts the red portion of white.
Manually adjusts the green portion of white.
Manually adjusts the blue portion of white.
Turns meter adjustment on.
Turns automatic test patterns for manual adjustments on.
Sets the measured intensity of red to 453.
Turns edge blending on or off.
Turns marker on or off.
Turns the grid test pattern on or off.
Displays the solid color test pattern.
Description
Description
Description
Commands
33
Advertisement
Table of Contents
