Focus (FCS)
Use this command to adjust the lens focus.
Subcode
None. Use n and p to select next and previous values.
Read/Write
Write only
Examples
Command
(FCS n)
High Altitude (HAT)
Use this command to increase the fan speeds to improve cooling when the projector is installed in a
high altitude location.
Subcode
None. Use n and p to select next and previous values.
Read/Write
Yes
Examples
Command
(HAT0): High Altitude off
(HAT1): High Altitude on
Hot Key Settings (HKS)
Use this command to assign different functions to the infrared remote hot key.
Subcode
None. Use n and p to select next and previous values.
Read/Write
Yes
G Series Serial Commands Application Guide
020-000578-02 Rev. 1 (01-2014)
Increases the focus setting by 1.
Turns high altitude functionality off.
Turns high altitude functionality on.
Description
Description
Commands
35