Vertical Pincushion (Vpc) - Christie G Series Application Manual

Examples
Command
(SZP0):Auto
(SZP1):Native
(SZP2):4:3
(SZP3):LetterBox
(SZP4):Full Size
(SZP5):Full Width
(SZP6):Full Height
(SZP7):Custom

Vertical Pincushion (VPC)

Use this command to adjust vertical distortion when a Dual Processor Warp Module (DPWM) is not
installed. If a DPWM is installed use the pincushion/barrel function for adjustments.
The adjustment range is 0 to 100 and the default value is 50.
Subcode
None
Read/Write
Yes
Examples
Command
(VPC50)
G Series Serial Commands Application Guide
020-000578-02 Rev. 1 (01-2014)
Displays an image with the detected size. (Default)
Displays the image in its native resolution.
Retains the 4:3 aspect ratio.
Displays the image with black borders on the top and bottom.
Fills the screen with the image (regardless of the source).
Stretches the image to the full display width and keeps the aspect ratio.
Stretches the image to the full display height and keeps the aspect ratio.
Displays the image with a custom size and position for each source. This command
can only be run on DWX600-G, DHD600-G, and DWU600-G projectors.
Sets the vertical distortion value to 50.
Description
Description
Commands
15