Edge Enhancement (Edg); Flesh Tone Correction (Ftc) - Christie G Series Application Manual

Read/Write
Yes
Examples
Command
(DIM0):DynamicBlack off
(DIM1):DynamicBlack on

Edge Enhancement (EDG)

Use this command to apply edge enhancement to an image.
Subcode
None. Use n and p to select next and previous values.
Read/Write
Yes
Examples
Command
(EDG0): off
(EDG1): normal
(EDG2): Maximum

Flesh Tone Correction (FTC)

Use this command to modify the flesh tone setting in an image. The adjustment range is 0 to 100
and the default value is 50.
Subcode
None
Read/Write
Yes
Examples
Command
(FTC50)
G Series Serial Commands Application Guide
020-000578-02 Rev. 1 (01-2014)
Turns dynamic black off.
Turns dynamic black on.
Turns edge enhancement off.
Sets edge enhancement to normal.
Sets edge enhancement to the maximum value.
Sets the flesh tone setting to 50
Description
Description
Description
Commands
23