Table of Contents
Advertisement
Command
(LOC+LANG 4)
(LOC+LANG 5)
(LOC+LANG 6)
(LOC+LANG 7)
(LOC+LANG 8)
Lock Lens Motors (LCB+LOCK)
Use this command to lock all lens motors.
Subcode
Subcode
LOCK
Read/Write
Yes
Examples
Command
(LCB+LOCK0):Allow
(LCB+LOCK1):Locked
Menu Shift Horizontal (MSH)
Use this command to move on screen menus and messages horizontally. The adjustment range is 0
to 100 and the default value is 0.
Subcode
None
Read/Write
Yes
Examples
Command
(MSH0)
G Series Serial Commands Application Guide
020-000578-02 Rev. 1 (01-2014)
Sets the OSD language to Italian.
Sets the OSD language to Japanese.
Sets the OSD language to Korean.
Sets the OSD language to Russian.
Sets the OSD language to Spanish.
Locks the zoom, focus, horizontal and vertical lens motors.
Use
and
to select next and previous values.
n
p
Allows movement of the zoom, focus, horizontal and vertical lens motors.
Locks the zoom, focus, horizontal and vertical lens motors.
Moves the on screen menu to the left.
Description
Description
Description
Description
Commands
38
Advertisement
Table of Contents
