Test The Projector Emergency Stop; Adjust The Lens; Calibrate The Lens Motors; Select A Channel - Christie D4KLH60 Mirage 4KLH User Manual

3. To release the E-stop, rotate the knob clockwise.
4. Press Manual Reset on the projector.

Test the projector emergency stop

1. Press the emergency stop button on the projector.
2. Check the status lights on the back of the projector are off.
3. To release the E-stop, rotate the knob clockwise.
4. Press Manual Reset on the projector.

Adjust the lens

Electronic focus, zoom, and offsets can be adjusted electronically.
1. Tap the Lens tab on the TPC.
2. To shift the position of the lens vertically, tap the up and down arrows.
3. To shift the position of the lens horizontally, tap the left and right arrows.
4. To return the lens to the home position, tap Reset to Home Position.
5. To focus the image, under Focus tap the up and down arrows.
6. To zoom in or out, under Zoom, tap the up and down arrows.

Calibrate the lens motors

Reset and calibrate lens motors after
• changing a lens
• the projector is moved or jostled
• the lens motors are physically moved using the manual adjustment knobs
1. On the Lens tab, tap Calibrate Lens.

Select a channel

Channel files contain pre-configured optimum processing and display settings for different sources.
1. On the Home tab on the TPC, from the Channel list, select the channel you want.

Orient the screen image

1. To display the a white test pattern, on the Home tab in the Pattern list, select Flat White.
2. Tap Menu > Configuration > Image Orientation.
3. Select the orientation you want from the list.
D4KLH60/Mirage 4KLH User Manual
020-101375-02 Rev. 1 (06-2015)
Operate the Projector
24