Fib-Christie Link Video Mode; Fmd-Film Mode Detect; Frd-Frame Delay - Christie Crimson Technical Reference

FIB–Christie Link Video Mode
Enables or disables the Christie Link video input.
Commands
Command Description
FIB+SLT1 <value> Enables or disables the Christie Link video
input on the option card in slot 1.
When enabled, other inputs (on the HBMIC)
are inactive.
FIB+SLT2 <value> Enables or disables Christie Link input on
the option card in slot 2.
When enabled, other inputs (on the HBMIC)
are inactive.
FMD–Film Mode Detect
Enables or disables film motion detection.
Commands
Command Description
FMD <0 | 1> Enables or disables film detect.
This command is only available if video electronics are on and the
signal is interlaced. (Saved value)
Examples
Enable detect mode:
(FMD 1)
FRD–Frame Delay
Sets the delay between the input sync timing and the output sync timing.
The actual delay can vary based on the amount of processing applied to the image.
Crimson and Crimson Mirage Technical Reference–Serial Commands
020-102660-01 Rev. 1 (07-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Serial API commands
Values
0 = Disables Christie Link video input
(Default)
1 = Enables Christie Link video input
0 = Disables Christie Link video input
(Default)
1 = Enables Christie Link video input
Values
0 = Turns off film detect
1 = Turns on film detect
(Default)
28