Vpc-Vertical Pincushion; Vrt-Vertical Position; Wpk-White Peaking - Christie 599 GS Series Technical Reference

VPC–Vertical Pincushion
Adjusts the vertical distortion when a Dual Processor Warp module (DPWM) is not installed.
If a DPWM is installed use the pincushion/barrel function for adjustments.
Commands
Command Description
VPC <value> Sets the vertical distortion value.
Examples
Set the vertical distortion value to 25:
(VPC 25)
VRT–Vertical Position
Sets the vertical position of the image.
When applying this function, some of the active area is blank. Increase the value to move the active
image up.
Commands
Command Description
VRT <value> Sets the vertical position for the main image.
Examples
Set the vertical position to 50:
(VRT 50)
WPK–White Peaking
Increases the brightness of whites to near 100%.
This setting can only be applied to video sources.
GS Series 599 Serial Commands Technical Reference
020-102403-02 Rev. 1 (04-2017)
Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
©
Serial API commands
Values
0 to 100
50 (Default)
Values
0 to 100
50 (Default)
62