ESAB PUA 1 Manual page 79

TIG
Parameter
Current. Pulse current. Background
current
Pulse time
Background time
Slope--up time
Slope--down time
Gas pre--flow time
Gas post--flow time
Carbon Arc Gouging
Parameter
Voltage
Inductance
Control type
Italicised parameters are not available in synergetic mode.
The control type parameter does not have a true setting range. In carbon arc
gouging it is possible to choose between three regulator types numbered 1. 2 and 5.
bu12d04a
Setting range
4--320 A (Aristo 320)
4--450 A (Aristo 450)
0.001--5.000 s
0.001--5.000 s
0.0--25.0 s
0.0--25.0 s
0.0--25.0 s
0.0--25.0 s
Setting range
8.0--60.0 V
0--100%
Type number 1. 2. 5
- - 79 - -
Setting step
4 A
4 A
0.001 s
0.001 s
0.1 s
0.1 s
0.1 s
0.1 s
Setting step
0.25 V
1%
--