Table of Contents
Advertisement
A fourth value is shown in the character display.
6.2
Change Set Values
The value of certain parameters can be changed in the measurement test picture.
Which parameters these are depends on which weld process has been set. The
parameter values which can be adjusted are always marked with
Change by pressing
or
The window that
pops up will
disappear after 1.5 s
if neither of the
buttons are used.
bu12d04a
DIP/SPRAY. Metal cored Fe. Ar+8%CO2.
134 Amp
152 in/min
3.01 kW
DIP/SPRAY. Metal cored Fe. Ar+8%CO2.
22.5 Volt
134 Amp
VOLTAGE: 22.5 (+3.5) V
152 in/min
- - 42 - -
REM
QUIT
or
.
REM
QUIT
Advertisement
Table of Contents
