Table of Contents
Advertisement
9
AUXILIARY FUNCTIONS
9.1
Memory Card Functions
The PC card must be installed before you can
use the memory card functions.
1. Turn off the current to the welding machine.
2. Insert the PC card.
3. Turn on the current.
4. Choose auxiliary functions and press ENTER.
5. Choose memory card function and press ENTER
The following display is shown:
STORE
Used to store valid weld data settings (occupied memory locations 1--99) from the
controller to the PC card.
If the same weld data is already stored on the card. it is written over by that which
exists in the controller's own memory.
Exempel
The weld data
settings in the
controller are.
Press STORE.
The weld data settings from the controller are now
stored on the PC card
bu12d04a
MEMORY CARD FUNCTION
WELD DATA SETTINGS
STORE
DELETE
Setting control
1 2 3 10 12 50
- - 50 - -
Insert PC--
card here
RECALL
QUIT
The PC
card
is empty
1 2 3 10 12 50
PC card
PC card
Advertisement
Table of Contents
