ESAB PUA 1 Manual page 58

The picture in the character display shows that button number 1 has been assigned
the function CRATER FILL ON/OFF. Number 1 has been moved down to the line
CRATER FILL ON/OFF and farthest down in the character display you can read the
button text CRFILL for the left button.
The other two buttons can be assigned their own functions in the same way, by
pairing one of the functions in the left column together with a button number in the
right column.
To assign a new function to a button, place the cursor on the row NONE and press
the soft button you want to change. In the display, you'll see the button text NONE
and you can now assign the button a new function.
9.2.4.3 Average pulsed voltage
Alternatives for voltage methods with short pulsing are:
--average pulsed voltage.
--average voltage.
Average pulsed voltage
Voltage is measured during the pulse segment only and filtered before the voltage
value is presented on the display.
Average voltage
Voltage is measured during the pulse and background segment and filtered before
the voltage value is presented on the display.
The displayed values are used as in--data for internal and external quality functions.
bu12d04a
ASSOCIATE FUNCTIONS TO SOFT KEYS
Function
NONE
GAS PURGE
WIRE INCHING
TRIGGER MODE (2/4)
CRATERFILL ON/OFF
CREEPSTART ON/OFF
HOT START ON/OFF
TRIGG WELDDATA SWITCH ON/OFF
CRATR
FILL NONE
MAIN MENU
AUXILIARY FUNCTIONS
CONFIGURATION
MIG DEFAULTS
VOLT. MEASURE. IN PULS.
- - 58 - -
Soft button
2.3
1
NONE QUIT