Mig Configuration; Setting Example Mig - ESAB PUA 1 Manual

2.7

MIG Configuration

Under section 9.2.4.
2.8

Setting Example MIG

The following is an example of how to set the controller for MIG welding using
dip/spray transfer. Setting for pulse welding is done in a similar way. The example
assumes that the power source is in synergic mode.
2.8.1 Basic Settings
You can use the main menu to make settings such as wire, method and material
type.
We start by pressing the MENU key to bring up the main menu. We will make the
following five settings:
PROCESS = MIG
S
METHOD = DIP/SPRAY
S
WIRE TYPE = Fe
S
SHIELDING GAS = Ar+8%CO2
S
WIRE DIAMETER = 0.040" (1.0mm)
S
Process
The first setting is the
type of welding
process. Use the arrow
buttons to select the
line for PROCESS.
Press ENTER to call
up a list of options.
Position the cursor on the line for MIG in
the list and press ENTER.
We have now set PROCESS = MIG
bu12d04a
PROCESS:
METHOD:
WIRE TYPE:
SHIELDING GAS:
WIRE DIAMETER :
AUXILIARY FUNCTIONS
SET MEASURE
- - 17 - -
ESAB LUD 450
MIG
PULSE
Metal cored Fe
Ar+8%CO2
0.040" (1.0mm)
FAST
MEMORY MODE
MIG
STICK
TIG
CARBON; ArcAir
ENTER