Table of Contents
Advertisement
8
QUICK SETTING
8.1
Description of Quick Setting
If one or more weld data set--ups have been stored in the weld data memory, one or
more of these can be made available via the QUICK SETTING (FAST MODE) button
in the main menu.
When you press the button for quick setting (fast mode), the picture can appear like
this.
Four of the soft buttons can thus be "linked" to a weld--data setting of their own in the
weld--data memory. See soft button function under section 9.2.4.2.
The fifth soft button's 2nd function is used to shift functions for the four soft buttons.
You can shift the four soft buttons from having weld--data settings to having those
functions available in measure mode (gas purge, hot start, wire inching, trigger
mode, crater fill, creep start, etc.)
8.2
Configuration of Quick Setting (Fast Mode) Buttons
Under section 9.2.8.1.
bu12d04a
PROCESS:
METHOD:
WIRE TYPE:
SHIELDING GAS:
WIRE DIAMETER:
AUXILIARY FUNCTIONS
SET
MEASURE
DIP/SPRAY. Metal cored Fe Ar+8%CO2
22.5 Volt
134 Amp
152 in/min
WELD- -
WELD- -
DATA 1
DATA 2
- - 49 - -
ESAB LUD 450
MIG/MAG
DIP/SPRAY
Metal cored Fe
Ar+8%CO2
0.045" (1.2 mm)
"
FAST
MEMORY
MODE
WELD- -
WELD- -
DATA 3
DATA 4
ENTER
2ND
FUNCT
Advertisement
Table of Contents
