ESAB PUA 1 Manual page 47

Example
The data set--up stored most recently is automatically marked. If there is more than
one stored data set--up, the cursor can be moved between these with the left and
right arrow keys. We will now copy the contents of memory location 10 to location
50.
Using the plus/minus keys, you can indicate the memory location to which you want
to copy.
Go to number 50
with the plus button
and press ENTER.
Weld data number 10 has now been copied to memory location 50.
If memory location 50 was already occupied, this information would appear in the
character display.
Use the QUIT button to return to the memory menu.
bu12d04a
COPY MEMORY NO. 10 TO NO. 50
10
" DIP/SPRAY.Metal cored Fe, CO2, 0.045"
STORE OVER EXISTING WELD DATA
10
" DIP/SPRAY.Metal cored Fe, CO2, 0.045"
COPY MEMORY NO. 10 TO NO. 50
10 50
" DIP/SPRAY.Metal cored Fe. CO2, 0.045"
- - 47 - -
QUIT ENTER
?
NO YES
QUIT ENTER