Enter And Quit - ESAB PUA 1 Manual

1.6.2 Settings with Fixed Options
Certain settings are made by selecting an alternative from a list. The list might look
like this:
MIG
STICK
TIG
CARBON. ArcAir
Here the cursor is placed on the line for MIG. By pressing the ENTER button now
you would select the MIG option.
If instead you want to choose another option, you would move the cursor to the
chosen line by moving up or down using the arrow buttons
the ENTER button.
If you wanted to exit the list without making a selection, you would simply press the
QUIT button.
For some settings there are so many options that they cannot all be displayed at the
same time. An arrow at the top or bottom of the list indicates that more options will
become visible if you scroll up or down using the arrow buttons.
1.6.3 ON/OFF or YES/NO Settings
With certain functions you can switch the setting to ON or OFF, or to YES or NO. The
synergetic function in MIG and STICK welding is an example of such a function.
ON/OFF or YES/NO settings can be selected in either of two ways:
You can select ON or OFF or YES or NO from a list of options as described above.
Or you can use the plus/minus keys to select ON/OFF or YES/NO.
+(plus) = ON or YES
S
-- (minus) = OFF or NO
S
1.7

ENTER and QUIT

Both of the "soft" buttons at the bottom right are reserved for ENTER and (QUIT).
Pressing ENTER confirms the selected option in a menu or list.
S
Pressing QUIT brings you back to the previous menu or display.
S
bu12d04a
- - 10 - -
. You can then press