ESAB PUA 1 Manual page 37

Set SLOPE DOWN
TIME to 1.4 s by
stepping with the
lower plus/minus
button.
Gas Pre- - and Post- -Flow
The gas pre-- and post--flow parameters are connected to specific plus/minus
buttons in the same way as for the above ramp parameters. The upper plus/minus
button applies during setting of gas pre--flow and the lower button is used during
setting of gas post--flow.
Place the cursor on the
row for GAS
PRE--FLOW and GAS
POST--FLOW.
Set GAS PRE--FLOW
to 3 s. by stepping with
the upper plus/minus
button.
Set GAS
POST--FLOW to
5.0 s. by stepping
with the lower
plus/minus button.
We have now completed the settings for TIG welding.
bu12d04a
WELD DATA SETTING
CURRENT:
SLOPE UP TIME:
SLOPE DOWN TIME:
GASPREFLOW:
GASPOSTFLOW:
GAS 4
PURGE STROKE
WELD DATA SETTING
CURRENT:
SLOPE UP TIME:
SLOPE DOWN TIME:
GASPREFLOW:
GASPOSTFLOW:
GAS 4
PURGE STROKE
WELD DATA SETTING
CURRENT:
SLOPE UP:
SLOPE DOWN:
GASPREFLOW:
GASPOSTFLOW:
GAS 4
PURGE STROKE
- - 37 - -
200 A
# 2.0 s
1.4 s
*
2.5 s
3.3 s
QUIT
200 A
2.0 s
1.4 s
# 3.0 s
3.3 s
*
QUIT
200 A
2.0 s
1.4 s
# 3.0
5.0
*
QUIT