Tig--Configuration; Setting Example Tig - ESAB PUA 1 Manual

4.3 TIG- -configuration
Under section 9.2.6.
4.4

Setting Example TIG

The following explains how to set up for TIG welding using the constant current
method. The setting procedure is similar for pulse welding.
4.4.1 Basic Settings
We start by displaying the main menu, if this has not already been done, by pressing
the MENU button.
We will make the following four settings:
PROCESS = TIG
S
METHOD = CONSTANT--DC
S
START METHOD = TOUCH TIG
S
TRIGGER MODE= 2--STROKE
S
Process
Use the arrow
buttons to select
PROCESS. Press
ENTER to call up a
list of options.
Position the cursor on the line for TIG in the list and
press ENTER. We have now set PROCESS =
TIG.
bu12d04a
PROCESS:
ELECTRODE TYPE:
ELECTRODE DIAMETER:
AUXILIARY FUNCTIONS
SET MEASURE
- - 33 - -
ESAB LUD 450
STICK
BASIC (E7018)
1/8" (2.5mm)
"
FAST
MEMORY MODE
MIG
STICK
TIG
CARBON. ArcAir
ENTER